CCTVs may disappear and need to be repaired after a few years of work and depreciation or for reasons such as electricity fluctuations, non -principled installations, etc. CCTV failures include CCTV power supply, disconnection or not capturing a CCTV camera, image jump and noise, lane in the camera image, image whiteness, complete CCTV disability The CCTV night vision was dropped, the CCTV turning, and so on. CCTV repair includes analogue CCTV repair, network CCTV repair, Speed CCTV repair, etc.
The reason for the CCTV not turning on
If the CCTV is completely disabled and not turned on, it can have 3 reasons. The reasons for not turning on the CCTV CCTV (adapter) are definitely in the power cord or burning of the CCTV camera, which should be examined by the CCTV or quota expert.
To ensure the power supply is healthy. Or its failure, you can connect the camera to another power supply, and if the camera is turned on by the new power supply, there is no need to repair the CCTV camera and the problem is the camera's power supply.
To ensure the camera's wiring is healthy, if the CCTV is long and the power supply is long, you can connect the camera directly to the power supply by removing long wiring.
if With the tests mentioned, the problem was not resolved, most likely the CCTV itself is burnt. If you are looking for a CCTV repair center in the Republic of Tehran, you can contact Safeguards to repair your CCTV.
Safe CCTV repairs are fully specialized and at the best price. You can contact the phone numbers on the Safe website to inquire about the cost of repairing a CCTV camera. If you are not sure of your CCTV burning and crashing, you can request the expert's troubleshooter to make the necessary reviews and if the camera is damaged and needs to be repaired. , To repair it.
Most reputable brands of CCTV, including Dahua CCTV, Hikvision CCTV, Hilok CCTV, Sony CCTV, Panasonic CCTV, Oxis CCTV Camera ( Axis), Simaran CCTV and ... are repaired.
Generally, the statistics of miscellaneous branded CCTVs that are sold at cheap and without warranty prices are higher than that of reputable brand failure. Try to select products that have warranty and after -sales service when buying a CCTV camera. Another cause of CCTV and need to be repaired, unnecessary installations, and camera installations in the outdoor (non -roof) is that you should use waterproof cameras.
The cause of the CCTV Burning
As we said at the beginning, burning the CCTV can have different causes. Reasons such as unnatural installation, use of inappropriate power supply, power fluctuations, interruption and connection of electricity, physical injuries and kicks, etc. can cause a CCTV burning and crashing.
If you want to Avoid such things and do not need to repair a CCTV camera. You can use the UPS device (CCTV Battery) to avoid damaging the device during power outages and the imaging operation is done without interruption. Things that are effective in damaging and burning the CCTV camera are the use of low -quality connections and cables, which cause frequent power outages and consequently burn the camera.
Non -rotating the Speed CCTV
To rotate the Speed CCTV cameras, the camera must be properly defined in the DVR or NVR. If checking this or connections, the CCTV may not rotate the camera's driving engine.
CCTV Night Camera Camera
Night CCTVs have a series of infrared LEDs for night imaging. If the camera does not shoot at night or captures low quality, some of the infrared LEDs may be burnt or need to be replaced. CCTV Camera LED replacement is performed by safeguards.
CCTV repair in Tehran
The board of each electronic device is like its heart. Damage and failure of the CCTV camera can disrupt the recording of images. Repairing or replacing the CCTV camera is a fully specialized task and should be done by the technician. To replace the CCTV board, the board and module must be used with the previous camera image sensor with similar pins. You can get in touch with safeguards to repair your burnt CCTV.